| Citation: |
Xie Renzhong, Jiang Chen, Li Weinan, Huang Yumei, Hong Zhiliang. A dual-mode analog baseband with digital-assisted DC-offset calibration for WCDMA/GSM receivers[J]. Journal of Semiconductors, 2011, 32(12): 125001. doi: 10.1088/1674-4926/32/12/125001
Xie R Z, Jiang C, Li W N, Huang Y M, Hong Z L. A dual-mode analog baseband with digital-assisted DC-offset calibration for WCDMA/GSM receivers[J]. J. Semicond., 2011, 32(12): 125001. doi: 10.1088/1674-4926/32/12/125001.
Export: BibTex EndNote
|
A dual-mode analog baseband with digital-assisted DC-offset calibration for WCDMA/GSM receivers
doi: 10.1088/1674-4926/32/12/125001
-
Abstract
A dual-mode analog baseband with digital-assisted DC-offset calibration (DCOC) for WCDMA/GSM receiver is presented. A digital-assisted DCOC is proposed to solve the DC-offset problem by removing the DC-offset component only. This method has no bandwidth sacrifice. After calibration the measured output residual offset voltage is within 5 mV at most gain settings and the IIP2 is more than 60 dBm. The baseband is designed to be reconfigurable at bandwidths of 200 kHz and 2.1 MHz. Total baseband gain can be programmed from 6 to 54 dB. The chip is manufactured with 0.13 μm CMOS technology and consumes 10 mA from a 1.5 V supply in the GSM mode including an on-chip buffer while the core area occupies 1.2 mm2.-
Keywords:
- analog baseband
-
References
[1] [2] [3] [4] [5] [6] [7] [8] [9] -
Proportional views
DownLoad: