Abstract: Copper chemical mechanical polishing (CMP) is influenced by geometric characteristics such as line width and pattern density, as well as by the more obvious parameters such as slurry chemistry, pad type, polishing pressure and rotational speed. Variations in the copper thickness across each die and across the wafer can impact the circuit performance and reduce the yield. In this paper, we propose a modeling method to simulate the polishing behavior as a function of layout pattern factors. Under the same process conditions, the pattern density, the line width and the line spacing have a strong influence on copper dishing, dielectric erosion and topography. The test results showed: the wider the copper line or the spacing, the higher the copper dishing; the higher the density, the higher the dielectric erosion; the dishing and erosion increase slowly as a function of increasing density and go into saturation when the density is more than 0.7.

Key words: copper chemical mechanical polishing