Abstract: An LED driving circuit in accurate proportional current sampling mode is designed and fabricated based on CSMC 0.5 μm standard CMOS technology. It realizes accurate sensing of sampling current variation with output driving current. A better constant output current characteristic is achieved by using an amplifier to clamp the drain voltage of both the sampling MOSFET and power MOSFET to the same value with feedback control. Small signal equivalent circuit analysis shows that the small signal output resistance in the accurate proportional current sampling mode circuit is much larger than that in a traditional proportional current sampling mode circuit, and circuit stability could be assured. Circuit simulation and chip testing results show that when the LED driving current is 350 mA and the power supply is 6 V with ±10% variation, the stability of the output constant current of the accurate proportional current sampling mode LED driving IC will show 41% improvement over that of a traditional proportional current sampling mode LED driving IC.

Key words: LED driver,  accurate proportional current sampling,  constant current