| Citation: |
Yang Hongdong, Yu Qi, Wang Xiangzhan, Li Jingchun, Ning Ning, Yang Mohua. Growth of strained-Si material using low-temperature Si combined with ion implantation technology[J]. Journal of Semiconductors, 2010, 31(6): 063001. doi: 10.1088/1674-4926/31/6/063001
Yang H D, Yu Q, Wang X Z, Li J C, Ning N, Yang M H. Growth of strained-Si material using low-temperature Si combined with ion implantation technology[J]. J. Semicond., 2010, 31(6): 063001. doi: 10.1088/1674-4926/31/6/063001.
Export: BibTex EndNote
|
Growth of strained-Si material using low-temperature Si combined with ion implantation technology
doi: 10.1088/1674-4926/31/6/063001
-
Abstract
In order to fabricate strained-Si MOSFETs, we present a method to prepare strained-Si material with highquality surface and ultra-thin SiGe virtual substrate. By sandwiching a low-temperature Si (LT-Si) layer between a Si buffer and a pseudomorphic Si0.8Ge0.2 layer, the surface roughness root mean square (RMS) is 1.02 nm and the defect density is 1E6 cm-2 owing to the misfit dislocations restricted to the LT-Si layer and the threading dislocations suppressed from penetrating into the Si0.8Ge0.2 layer. By employing PC implantation and rapid thermal annealing, the strain relaxation degree of the Si0.8Ge0.2 layer increases from 85.09% to 96.41% and relaxation is more uniform. Meanwhile, the RMS (1.1 nm) varies a little and the defect density varies little. According to the results, the method of combining an LT-Si layer with ion implantation can prepare high-quality strained-Si material with a high relaxation degree and ultra-thin SiGe virtual substrate to meet the requirements of device applications. -
References
-
Proportional views
DownLoad: