| Citation: |
Sun Peng, Hu Ming, Li Mingda, Ma Shuangyun. Nano-WO3 film modified macro-porous silicon (MPS) gas sensor[J]. Journal of Semiconductors, 2012, 33(5): 054012. doi: 10.1088/1674-4926/33/5/054012
Sun P, Hu M, Li M D, Ma S Y. Nano-WO3 film modified macro-porous silicon (MPS) gas sensor[J]. J. Semicond., 2012, 33(5): 054012. doi: 10.1088/1674-4926/33/5/054012.
Export: BibTex EndNote
|
Nano-WO3 film modified macro-porous silicon (MPS) gas sensor
doi: 10.1088/1674-4926/33/5/054012
-
Abstract
We prepared macro-porous silicon (MPS) by electrochemical corrosion in a double-tank cell on the surface of single-crystalline P-type silicon. Then, nano-WO3 films were deposited on MPS layers by DC facing target reactive magnetron sputtering. The morphologies of the MPS and WO3/MPS samples were investigated by using a field emission scanning electron microscope. The crystallization of WO3 and the valence of the W in the WO3/MPS sample were characterized by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The gas sensing properties of MPS and WO3/MPS gas sensors were thoroughly measured at room temperature. It can be concluded that: the WO3/MPS gas sensor shows the gas sensing properties of a P-type semiconductor gas sensor. The WO3/MPS gas sensor exhibits good recovery characteristics and repeatability to 1 ppm NO2. The addition of WO3 can enhance the sensitivity of MPS to NO2. The long-term stability of a WO3/MPS gas sensor is better than that of an MPS gas sensor. The sensitivity of the WO3/MPS gas sensor to NO2 is higher than that to NH3 and C2H5OH. The selectivity of the MPS to NO2 is modified by deposited nano-WO3 film.-
Keywords:
- MPS
-
References
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] -
Proportional views
DownLoad: