J. Semicond. > 2015, Volume 36 > Issue 9 > 094010, doi: 10.1088/1674-4926/36/9/094010
|

SEMICONDUCTOR DEVICES

Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser

Qing Ke, Shaoyang Tan, Songtao Liu, Dan Lu, Ruikang Zhang, Wei Wang and Chen Ji

+ Author Affiliations

 Corresponding author: Ke Qing, keqing12@semi.ac.cn

PDF

Abstract: A comprehensive design optimization of 1.55-μm high power InGaAsP/InP board area lasers is performed aiming at increasing the internal quantum efficiency (ηi) while maintaining the low internal loss (αi) of the device, thereby achieving high power operation. Four different waveguide structures of broad area lasers were fabricated and characterized in depth. Through theoretical analysis and experiment verifications, we show that laser structures with stepped waveguide and thin upper separate confinement layer will result in high ηi and overall slope efficiency. A continuous wave (CW) single side output power of 160 mW was obtained for an uncoated laser with a 50-μm active area width and 1 mm cavity length.

Key words: high power, laser, InP, internal loss, internal quantum efficiency



[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
Fig. 1.  Schematic diagram of the 1.55 $\mu $m MQW laser epitaxial structure.

DownLoad: Full-Size Img PowerPoint
Fig. 2.  Simulated energy band diagram of the 1.55 $\mu$m laser structure with $Q$1.2 InGaAsP SCLs under flat-band conditions.

DownLoad: Full-Size Img PowerPoint
Fig. 3.  (Color online) (a) Simulated electron and (b) corresponding hole current density distribution in the vertical direction for different SCL composition $Q$ values (zero on the $x$-axis corresponds to n type substrate).

DownLoad: Full-Size Img PowerPoint
Fig. 4.  Schematic band diagram of different waveguide structures (Types A-D),with variations in SCL waveguide thickness and QW numbers. Actual parameters given in Table 1,where $E_{\rm g1}$ corresponds to $Q$1.2,$E_{\rm g2}$ corresponds to $Q$1.1.

DownLoad: Full-Size Img PowerPoint
Fig. 5.  Inverse external differential quantum efficiency 1/$\eta_{\rm d}$ as a function of the cavity length (Type D).

DownLoad: Full-Size Img PowerPoint
Fig. 6.  CW single side output power against drive current for 1 mm cavity length,50 $\mu $m strip width,uncoated laser diodes from Type D. Laser spectrum at $I =$ 400 mA is shown in the inset.

DownLoad: Full-Size Img PowerPoint

Table 1.   Active region design parameters,experimental $\alpha_{\rm i}$ and $\eta_{\rm i}$ values,calculated $\alpha_{\rm i}$,and two side slope efficiency at $L=$ 1 mm (Types A-D).

DownLoad: CSV
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]

    • Search

    Advanced Search >>

    GET CITATION

    shu

    Export: BibTex EndNote

    Article Metrics

    Article views: 3795 Times PDF downloads: 101 Times Cited by: 0 Times

    History

    Received: 09 February 2015 Revised: Online: Published: 01 September 2015

    Catalog

      Email This Article

      User name:
      Email:*请输入正确邮箱
      Code:*验证码错误
      Send
      Article Navigation >  Journal of Semiconductors  > 2015  >  36(9): 094010
      Qing Ke, Shaoyang Tan, Songtao Liu, Dan Lu, Ruikang Zhang, Wei Wang, Chen Ji. Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser[J]. Journal of Semiconductors, 2015, 36(9): 094010. doi: 10.1088/1674-4926/36/9/094010 Q Ke, S Y Tan, S T Liu, D Lu, R K Zhang, W Wang, C Ji. Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser[J]. J. Semicond., 2015, 36(9): 094010. doi: 10.1088/1674-4926/36/9/094010.Export: BibTex EndNote
      Citation:
      Qing Ke, Shaoyang Tan, Songtao Liu, Dan Lu, Ruikang Zhang, Wei Wang, Chen Ji. Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser[J]. Journal of Semiconductors, 2015, 36(9): 094010. doi: 10.1088/1674-4926/36/9/094010

      Q Ke, S Y Tan, S T Liu, D Lu, R K Zhang, W Wang, C Ji. Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser[J]. J. Semicond., 2015, 36(9): 094010. doi: 10.1088/1674-4926/36/9/094010.
      Export: BibTex EndNote
      shu

      Fabrication and optimization of 1.55-μm InGaAsP/InP high-power semiconductor diode laser

      doi: 10.1088/1674-4926/36/9/094010

      • Key Laboratory of Semiconductors Materials, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China

      Funds:

      Project supported by the National Natural Science Foundation of China (Nos. 61274046, 61201103) and the National High Technology Research and Development Program of China (No. 2013AA014202).

      More Information
      • Corresponding author: Ke Qing, keqing12@semi.ac.cn
      • Received Date: 2015-02-09
      • Accepted Date: 2015-03-03
      • Published Date: 2015-01-25

      Catalog

        Journal of Semiconductors © 2017 All Rights Reserved   京ICP备05085259号-2

        /

        DownLoad:  Full-Size Img  PowerPoint
        Return
        Return