| Citation: |
Xu Wenqing, Qu Shengchun, Wang Kefan, Bi Yu, Liu Kong, Wang Zhanguo. Influence of thermal treatment temperatures on CdTe nanocrystal films and photoelectric properties of ITO/CdTe/Al[J]. Journal of Semiconductors, 2012, 33(9): 094002. doi: 10.1088/1674-4926/33/9/094002
Xu W Q, Qu S C, Wang K F, Bi Y, Liu K, Wang Z G. Influence of thermal treatment temperatures on CdTe nanocrystal films and photoelectric properties of ITO/CdTe/Al[J]. J. Semicond., 2012, 33(9): 094002. doi: 10.1088/1674-4926/33/9/094002.
Export: BibTex EndNote
|
Influence of thermal treatment temperatures on CdTe nanocrystal films and photoelectric properties of ITO/CdTe/Al
doi: 10.1088/1674-4926/33/9/094002
-
Abstract
The influence of sintering temperatures on solution-processed cadmium telluride (CdTe) nanocrystal films is studied in order to maximize the performance of CdTe/Al Schottky nanocrystal solar cells. The best overall performance of 2.67% efficiency at air mass 1.5 was achieved from devices with CdTe films sintered at 350 ℃ X-ray diffraction, scanning electron microscopy and UV-vis absorption measurements show that the CdTe nanocrystal grains began to grow remarkably well when sintering temperatures increased to 350 ℃. By analyzing the current-voltage characteristics, we find that the short-circuit current densities of devices increase with sintering temperatures ranging from 200 to 400 ℃, but, the over-sintered (450 ℃) treatment induces the shunting of devices.-
Keywords:
- solar cells
-
References
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] -
Proportional views
DownLoad: