| Citation: |
Zhao Jinxin, Hu Xueqing, Shi Yin, Wang Lei. An RF front-end with an automatic gain control technique for a U/V band CMMB receiver[J]. Journal of Semiconductors, 2011, 32(10): 105007. doi: 10.1088/1674-4926/32/10/105007
Zhao J X, Hu X Q, Shi Y, Wang L. An RF front-end with an automatic gain control technique for a U/V band CMMB receiver[J]. J. Semicond., 2011, 32(10): 105007. doi: 10.1088/1674-4926/32/10/105007.
Export: BibTex EndNote
|
An RF front-end with an automatic gain control technique for a U/V band CMMB receiver
doi: 10.1088/1674-4926/32/10/105007
-
Abstract
This paper presents a fully integrated RF front-end with an automatic gain control (AGC) scheme and a digitally controlled radio frequency varied gain amplifier (RFVGA) for a U/V band China Mobile Multimedia Broadcasting (CMMB) direct conversion receiver. The RFVGA provides a gain range of 50 dB with a 1.6 dB step. The adopted AGC strategy could improve immunity to adjacent channel signal, which is of importance for CMMB application. The front-end, composed of a low noise amplifier (LNA), an RFVGA, a mixer and AGC, achieves an input referred 3rd order intercept point (IIP3) of 4.9 dBm with the LNA in low gain mode and the RFVGA in medium gain mode, and a less than 4 dB double side band noise figure with both the LNA and the RFVGA in high gain mode. The proposed RF front-end is fabricated in a 0.35 μm SiGe BiCMOS technology and consumes 25.6 mA from a 3.0 V power supply.-
Keywords:
- CMMB
-
References
[1] [2] [3] [4] [5] -
Proportional views
DownLoad: