RESEARCH HIGHLIGHTS

Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%

Shi Chen1, Chuantian Zuo2, Baomin Xu1, and Liming Ding2,

+ Author Affiliations

 Corresponding author: Baomin Xu, xubm@sustech.edu.cn; Liming Ding, ding@nanoctr.cn

PDF

Turn off MathJax



[1]
Jeong J, Kim M, Seo J, et al. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells. Nature, 2021, 592, 381 doi: 10.1038/s41586-021-03406-5
[2]
Yoo J J, Seo G, Chua M R, et al. Efficient perovskite solar cells via improved carrier management. Nature, 2021, 590, 587 doi: 10.1038/s41586-021-03285-w
[3]
Rong Y, Hu Y, Mei A, et al. Challenges for commercializing perovskite solar cells. Science, 2018, 361, eaat8235 doi: 10.1126/science.aat8235
[4]
Leijtens T, Bush K A, Prasanna R, et al. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors. Nat Energy, 2018, 3, 828 doi: 10.1038/s41560-018-0190-4
[5]
Anaya M, Lozano G, Calvo M E, et al. ABX3 perovskites for tandem solar cells. Joule, 2017, 1, 769 doi: 10.1016/j.joule.2017.09.017
[6]
Hoke E T, Slotcavage D J, Dohner E R, et al. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. Chem Sci, 2015, 6, 613 doi: 10.1039/C4SC03141E
[7]
McMeekin D P, Sadoughi G, Rehman W, et al. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells. Science, 2016, 351, 151 doi: 10.1126/science.aad5845
[8]
Bush K A, Frohna K, Prasanna R, et al. Compositional engineering for efficient wide band gap perovskites with improved stability to photoinduced phase segregation. ACS Energy Lett, 2018, 3, 428 doi: 10.1021/acsenergylett.7b01255
[9]
Abdi-Jalebi M, Andaji-Garmaroudi Z, Cacovich S, et al. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation. Nature, 2018, 555, 497 doi: 10.1038/nature25989
[10]
Rehman W, McMeekin D P, Patel J B, et al. Photovoltaic mixed-cation lead mixed-halide perovskites: Links between crystallinity, photo-stability and electronic properties. Energy Environ Sci, 2017, 10, 361 doi: 10.1039/C6EE03014A
[11]
Gharibzadeh S, Nejand B A, Jakoby M, et al. Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D perovskite heterostructure. Adv Energy Mater, 2019, 9, 1803699 doi: 10.1002/aenm.201803699
[12]
Hou Y, Aydin E, Bastiani M D, et al. Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon. Science, 2020, 367, 1135 doi: 10.1126/science.aaz3691
[13]
Chen B, Ren N, Li Y, et al. Insights into the development of monolithic perovskite/silicon tandem solar cells. Adv Energy Mater, 2021, in press doi: 10.1002/aenm.202003628
[14]
Jošt M, Kegelmann L, Korte L, et al. Monolithic perovskite tandem solar cells: A review of the present status and advanced characterization methods toward 30% efficiency. Adv Energy Mater, 2020, 10, 1904102 doi: 10.1002/aenm.201904102
[15]
Al-Ashouri A, Köhnen E, Li B, et al. Monolithic perovskite/silicon tandem solar cell with 29% efficiency by enhanced hole extraction. Science, 2020, 370, 1300 doi: 10.1126/science.abd4016
[16]
Kim D, Jung H J, Park I J, et al. Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites. Science, 2020, 368, 155 doi: 10.1126/science.aba3433
[17]
Xu J, Boyd C C, Yu Z J, et al. Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems. Science, 2020, 367, 1097 doi: 10.1126/science.aaz5074
[18]
Cheng M, Zuo C, Wu Y, et al. Charge-transport layer engineering in perovskite solar cells. Sci Bull, 2020, 65, 1237 doi: 10.1016/j.scib.2020.04.021
[19]
Yoshikawa K, Kawasaki H, Yoshida W, et al. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%. Nat Energy, 2017, 2, 17032 doi: 10.1038/nenergy.2017.32
Fig. 1.  (Color online) (a) Schematic diagram for PL measurement of perovskite films deposited on ITO substrates with different hole-transport layers. Time-dependent PL spectra (inset: molecular structure) for 1.68 eV perovskite films coated on (b) ITO/PTAA or (c) ITO/Me-4PACz substrates. (d) FF and its losses in PTAA and Me-4PACz based single-junction solar cells. (e) Schematic illustration for monolithic perovskite/silicon tandem device. (f) J–V curves for champion tandem solar cells with PTAA (in-house measurement) or Me-4PACz (certified at Fraunhofer). Reproduced with permission[15], Copyright 2020, American Association for the Advancement of Science.

[1]
Jeong J, Kim M, Seo J, et al. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells. Nature, 2021, 592, 381 doi: 10.1038/s41586-021-03406-5
[2]
Yoo J J, Seo G, Chua M R, et al. Efficient perovskite solar cells via improved carrier management. Nature, 2021, 590, 587 doi: 10.1038/s41586-021-03285-w
[3]
Rong Y, Hu Y, Mei A, et al. Challenges for commercializing perovskite solar cells. Science, 2018, 361, eaat8235 doi: 10.1126/science.aat8235
[4]
Leijtens T, Bush K A, Prasanna R, et al. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors. Nat Energy, 2018, 3, 828 doi: 10.1038/s41560-018-0190-4
[5]
Anaya M, Lozano G, Calvo M E, et al. ABX3 perovskites for tandem solar cells. Joule, 2017, 1, 769 doi: 10.1016/j.joule.2017.09.017
[6]
Hoke E T, Slotcavage D J, Dohner E R, et al. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. Chem Sci, 2015, 6, 613 doi: 10.1039/C4SC03141E
[7]
McMeekin D P, Sadoughi G, Rehman W, et al. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells. Science, 2016, 351, 151 doi: 10.1126/science.aad5845
[8]
Bush K A, Frohna K, Prasanna R, et al. Compositional engineering for efficient wide band gap perovskites with improved stability to photoinduced phase segregation. ACS Energy Lett, 2018, 3, 428 doi: 10.1021/acsenergylett.7b01255
[9]
Abdi-Jalebi M, Andaji-Garmaroudi Z, Cacovich S, et al. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation. Nature, 2018, 555, 497 doi: 10.1038/nature25989
[10]
Rehman W, McMeekin D P, Patel J B, et al. Photovoltaic mixed-cation lead mixed-halide perovskites: Links between crystallinity, photo-stability and electronic properties. Energy Environ Sci, 2017, 10, 361 doi: 10.1039/C6EE03014A
[11]
Gharibzadeh S, Nejand B A, Jakoby M, et al. Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D perovskite heterostructure. Adv Energy Mater, 2019, 9, 1803699 doi: 10.1002/aenm.201803699
[12]
Hou Y, Aydin E, Bastiani M D, et al. Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon. Science, 2020, 367, 1135 doi: 10.1126/science.aaz3691
[13]
Chen B, Ren N, Li Y, et al. Insights into the development of monolithic perovskite/silicon tandem solar cells. Adv Energy Mater, 2021, in press doi: 10.1002/aenm.202003628
[14]
Jošt M, Kegelmann L, Korte L, et al. Monolithic perovskite tandem solar cells: A review of the present status and advanced characterization methods toward 30% efficiency. Adv Energy Mater, 2020, 10, 1904102 doi: 10.1002/aenm.201904102
[15]
Al-Ashouri A, Köhnen E, Li B, et al. Monolithic perovskite/silicon tandem solar cell with 29% efficiency by enhanced hole extraction. Science, 2020, 370, 1300 doi: 10.1126/science.abd4016
[16]
Kim D, Jung H J, Park I J, et al. Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites. Science, 2020, 368, 155 doi: 10.1126/science.aba3433
[17]
Xu J, Boyd C C, Yu Z J, et al. Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems. Science, 2020, 367, 1097 doi: 10.1126/science.aaz5074
[18]
Cheng M, Zuo C, Wu Y, et al. Charge-transport layer engineering in perovskite solar cells. Sci Bull, 2020, 65, 1237 doi: 10.1016/j.scib.2020.04.021
[19]
Yoshikawa K, Kawasaki H, Yoshida W, et al. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%. Nat Energy, 2017, 2, 17032 doi: 10.1038/nenergy.2017.32
  • Search

    Advanced Search >>

    GET CITATION

    shu

    Export: BibTex EndNote

    Article Metrics

    Article views: 1664 Times PDF downloads: 103 Times Cited by: 0 Times

    History

    Received: 17 August 2021 Revised: Online: Uncorrected proof: 23 August 2021Published: 03 December 2021

    Catalog

      Email This Article

      User name:
      Email:*请输入正确邮箱
      Code:*验证码错误
      Shi Chen, Chuantian Zuo, Baomin Xu, Liming Ding. Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%[J]. Journal of Semiconductors, 2021, 42(12): 120203. doi: 10.1088/1674-4926/42/12/120203 S Chen, C T Zuo, B M Xu, L M Ding, Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%[J]. J. Semicond., 2021, 42(12): 120203. doi: 10.1088/1674-4926/42/12/120203.Export: BibTex EndNote
      Citation:
      Shi Chen, Chuantian Zuo, Baomin Xu, Liming Ding. Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%[J]. Journal of Semiconductors, 2021, 42(12): 120203. doi: 10.1088/1674-4926/42/12/120203

      S Chen, C T Zuo, B M Xu, L M Ding, Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%[J]. J. Semicond., 2021, 42(12): 120203. doi: 10.1088/1674-4926/42/12/120203.
      Export: BibTex EndNote

      Monolithic perovskite/silicon tandem solar cells offer an efficiency over 29%

      doi: 10.1088/1674-4926/42/12/120203
      More Information
      • Author Bio:

        Shi Chen received his PhD from Friedrich-Alexander University Erlangen-Nuremberg in 2019 under the supervision of Prof. Christoph J. Brabec. Then he joined the Department of Materials Science and Engineering and Academy for Advanced Interdisciplinary Studies at Southern University of Science and Technology as a research assistant professor. His research interests include the design and synthesis of hybrid perovskite materials, and their applications in solar cells, light-emitting diodes and detectors

        Chuantian Zuo received his PhD in 2018 from National Center for Nanoscience and Technology (CAS) under the supervision of Professor Liming Ding. Then he did postdoctoral research at CSIRO, Australia. Currently, he is an assistant professor in Liming Ding Group. His research focuses on innovative fabrication techniques for perovskite solar cells

        Baomin Xu received his BS in Materials Science and Engineering at Tsinghua University in 1986, and received his PhD in Materials Science and Engineering at Shanghai Institute of Ceramics (CAS) in 1991. He did postdoctoral studies at Materials Research Laboratory, Pennsylvania State University (1994–1996). Afterwards, he became an assistant professor at Institute of Materials Science. He joined Southern University of Science and Technology in 2014 and served as chair professor in the Department of Materials Science and Engineering. His research focuses on solar cells, lithium-ion battery and fuel cells

        Liming Ding got his PhD from University of Science and Technology of China (was a joint student at Changchun Institute of Applied Chemistry, CAS). He started his research on OSCs and PLEDs in Olle Inganäs Lab in 1998. Later on, he worked at National Center for Polymer Research, Wright-Patterson Air Force Base and Argonne National Lab (USA). He joined Konarka as a Senior Scientist in 2008. In 2010, he joined National Center for Nanoscience and Technology as a full professor. His research focuses on innovative materials and devices. He is RSC Fellow, the nominator for Xplorer Prize, and the Associate Editors for Science Bulletin and Journal of Semiconductors

      • Corresponding author: xubm@sustech.edu.cnding@nanoctr.cn
      • Received Date: 2021-08-17
      • Published Date: 2021-12-10

      Catalog

        /

        DownLoad:  Full-Size Img  PowerPoint
        Return
        Return