Perovskite nanowire networks for photodetectors

Hai Zhou; Hao Wang; Liming Ding

doi:10.1088/1674-4926/42/11/110202

J. Semicond. > 2021, Volume 42 > Issue 11 > 110202

RESEARCH HIGHLIGHTS

Perovskite nanowire networks for photodetectors

Hai Zhou¹, Hao Wang^1, and Liming Ding^2,

+ Author Affiliations

1. School of Microelectronics, Hubei Key Laboratory of Ferroelectric and Dielectric Materials and Devices, Hubei University, Wuhan 430062, China
2. Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

Author Bio:

Hai Zhou is an Associate Professor of Faculty of Physics and Electronic Science, Hubei University. He received his MS and PhD degrees in Microelectronics and Solid State Electronics from Wuhan University. In 2017, he joined Yanfa Yan Group in University of Toledo as a visiting scholar. His research focuses on optoelectronic devices based on perovskites.

Hao Wang is the Chair Professor of Faculty of Physics and Electronic Science and Dean of Graduate School, Hubei University. He received his PhD from Huazhong University of Science and Technology in 1994 and worked as a postdoc at Peking University and Chinese University of Hong Kong till 2002. His research focuses on energy and information applications of nanostructured materials including solar cells, fuel cells, non-volatile memory, etc.

Liming Ding got his PhD from University of Science and Technology of China (was a joint student at Changchun Institute of Applied Chemistry, CAS). He started his research on OSCs and PLEDs in Olle Inganäs Lab in 1998. Later on, he worked at National Center for Polymer Research, Wright-Patterson Air Force Base and Argonne National Lab (USA). He joined Konarka as a Senior Scientist in 2008. In 2010, he joined National Center for Nanoscience and Technology as a full professor. His research focuses on innovative materials and devices. He is RSC Fellow, the nominator for Xplorer Prize, and the Associate Editors for Science Bulletin and Journal of Semiconductors.

Corresponding author: Hao Wang, wangh@hubu.edu.cn; Liming Ding, ding@nanoctr.cn

DOI: 10.1088/1674-4926/42/11/110202

References

[1]	Lin C H, Kang C Y, Wu T Z, et al. Giant optical anisotropy of perovskite nanowire array films. Adv Funct Mater, 2020, 30(14), 1909275 doi: 10.1002/adfm.201909275
[2]	Pan S, Zou H, Wang A C, et al. Rapid capillary-assisted solution printing of perovskite nanowire arrays enables scalable production of photodetectors. Angew Chem Int Ed, 2020, 59(35), 14942 doi: 10.1002/anie.202004912
[3]	Zhao Y, Qiu Y, Gao H, et al. Layered-perovskite nanowires with long-range orientational order for ultrasensitive photodetectors. Adv Mater, 2020, 32(9), 1905298 doi: 10.1002/adma.201905298
[4]	Singh R, Suranagi S R, Yang S J, et al. Enhancing the power conversion efficiency of perovskite solar cells via the controlled growth of perovskite nanowires. Nano Energy, 2018, 51, 192 doi: 10.1016/j.nanoen.2018.06.054
[5]	Chang C Y, Tsai B C, Lin M Z, et al. An integrated approach towards the fabrication of highly efficient and long-term stable perovskite nanowire solar cells. J Mater Chem A, 2017, 5(43), 22824 doi: 10.1039/C7TA07968K
[6]	Zhu H, Fu Y, Meng F, et al. Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors. Nat Mater, 2015, 14(6), 636 doi: 10.1038/nmat4271
[7]	Waleed A, Tavakoli M M, Gu L, et al. Lead-free perovskite nanowire array photodetectors with drastically improved stability in nanoengineering templates. Nano Lett, 2017, 17(1), 523 doi: 10.1021/acs.nanolett.6b04587
[8]	Deng W, Huang L, Xu X, et al. Ultrahigh-responsivity photodetectors from perovskite nanowire arrays for sequentially tunable spectral measurement. Nano Lett, 2017, 17(4), 2482 doi: 10.1021/acs.nanolett.7b00166
[9]	Zeng J, Zhou H, Liu R, et al. Combination of solution-phase process and halide exchange for all-inorganic, highly stable CsPbBr₃ perovskite nanowire photodetector. Sci China Mater, 2019, 62(1), 65 doi: 10.1007/s40843-018-9278-6
[10]	Asuo I M, Gedamu D, Ka I, et al. High-performance pseudo-halide perovskite nanowire networks for stable and fast-response photodetector. Nano Energy, 2018, 51, 324 doi: 10.1016/j.nanoen.2018.06.057
[11]	Deng H, Yang X, Dong D, et al. Flexible and semitransparent organolead triiodide perovskite network photodetector arrays with high stability. Nano Lett, 2015, 15(12), 7963 doi: 10.1021/acs.nanolett.5b03061
[12]	Fang Q, Shang Q, Zhao L, et al. Ultrafast charge transfer in perovskite nanowire/2D transition metal dichalcogenide heterostructures. J Phys Chem Lett, 2018, 9(7), 1655 doi: 10.1021/acs.jpclett.8b00260
[13]	Wu D, Zhou H, Song Z. et al Welding perovskite nanowires for stable, sensitive, flexible photodetectors. ACS Nano, 2020, 14, 2777 doi: 10.1021/acsnano.9b09315
[14]	Zhou H, Song Z, Grice C R, et al. Self-powered CsPbBr₃ nanowire photodetector with a vertical structure. Nano Energy, 2018, 53, 880 doi: 10.1016/j.nanoen.2018.09.040
[15]	Tang X, Zhou H, Pan X, et al. All-inorganic halide perovskite alloy nanowire network photodetectors with high performance. ACS Appl Mater Interfaces, 2020, 12(4), 4843 doi: 10.1021/acsami.9b21666

Fig. 1. (Color online) (a) SEM image for PNNs and the response time of the PDs. Reproduced with permission^[10], Copyright 2018, Elsevier. (b) The schematic of a PD (top) and photograph of network PD arrays (bottom). Reprinted with permission^[11], Copyright 2015, American Chemical Society. (c) Schematic of charge transfer pathways at the interface of PNNs/TMDC heterostructures upon 405 nm laser photoexcitation; side view of PNNs/TMDC heterostructure interface. Reprinted with permission^[12], Copyright 2018, American Chemical Society. (d) Enhancing device performance by using the welding strategy. Reprinted with permission^[13], Copyright 2020, American Chemical Society. (e) Cross-sectional SEM image for perovskite NW PD. The scale bar is 500 nm. Reprinted with permission^[15], Copyright 2018, Elsevier. (f) Absorption spectra for Br-rich perovskite NWs with different Sn²⁺ concentrations. Reproduced with permission^[14], Copyright 2020, American Chemical Society.

DownLoad: Full-Size Img PowerPoint

[1]	Lin C H, Kang C Y, Wu T Z, et al. Giant optical anisotropy of perovskite nanowire array films. Adv Funct Mater, 2020, 30(14), 1909275 doi: 10.1002/adfm.201909275
[2]	Pan S, Zou H, Wang A C, et al. Rapid capillary-assisted solution printing of perovskite nanowire arrays enables scalable production of photodetectors. Angew Chem Int Ed, 2020, 59(35), 14942 doi: 10.1002/anie.202004912
[3]	Zhao Y, Qiu Y, Gao H, et al. Layered-perovskite nanowires with long-range orientational order for ultrasensitive photodetectors. Adv Mater, 2020, 32(9), 1905298 doi: 10.1002/adma.201905298
[4]	Singh R, Suranagi S R, Yang S J, et al. Enhancing the power conversion efficiency of perovskite solar cells via the controlled growth of perovskite nanowires. Nano Energy, 2018, 51, 192 doi: 10.1016/j.nanoen.2018.06.054
[5]	Chang C Y, Tsai B C, Lin M Z, et al. An integrated approach towards the fabrication of highly efficient and long-term stable perovskite nanowire solar cells. J Mater Chem A, 2017, 5(43), 22824 doi: 10.1039/C7TA07968K
[6]	Zhu H, Fu Y, Meng F, et al. Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors. Nat Mater, 2015, 14(6), 636 doi: 10.1038/nmat4271
[7]	Waleed A, Tavakoli M M, Gu L, et al. Lead-free perovskite nanowire array photodetectors with drastically improved stability in nanoengineering templates. Nano Lett, 2017, 17(1), 523 doi: 10.1021/acs.nanolett.6b04587
[8]	Deng W, Huang L, Xu X, et al. Ultrahigh-responsivity photodetectors from perovskite nanowire arrays for sequentially tunable spectral measurement. Nano Lett, 2017, 17(4), 2482 doi: 10.1021/acs.nanolett.7b00166
[9]	Zeng J, Zhou H, Liu R, et al. Combination of solution-phase process and halide exchange for all-inorganic, highly stable CsPbBr₃ perovskite nanowire photodetector. Sci China Mater, 2019, 62(1), 65 doi: 10.1007/s40843-018-9278-6
[10]	Asuo I M, Gedamu D, Ka I, et al. High-performance pseudo-halide perovskite nanowire networks for stable and fast-response photodetector. Nano Energy, 2018, 51, 324 doi: 10.1016/j.nanoen.2018.06.057
[11]	Deng H, Yang X, Dong D, et al. Flexible and semitransparent organolead triiodide perovskite network photodetector arrays with high stability. Nano Lett, 2015, 15(12), 7963 doi: 10.1021/acs.nanolett.5b03061
[12]	Fang Q, Shang Q, Zhao L, et al. Ultrafast charge transfer in perovskite nanowire/2D transition metal dichalcogenide heterostructures. J Phys Chem Lett, 2018, 9(7), 1655 doi: 10.1021/acs.jpclett.8b00260
[13]	Wu D, Zhou H, Song Z. et al Welding perovskite nanowires for stable, sensitive, flexible photodetectors. ACS Nano, 2020, 14, 2777 doi: 10.1021/acsnano.9b09315
[14]	Zhou H, Song Z, Grice C R, et al. Self-powered CsPbBr₃ nanowire photodetector with a vertical structure. Nano Energy, 2018, 53, 880 doi: 10.1016/j.nanoen.2018.09.040
[15]	Tang X, Zhou H, Pan X, et al. All-inorganic halide perovskite alloy nanowire network photodetectors with high performance. ACS Appl Mater Interfaces, 2020, 12(4), 4843 doi: 10.1021/acsami.9b21666