Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

Zuolin Zhang; Mengjia Li; Jie Sun; Cong Chen; Jiangzhao Chen; Liming Ding

doi:10.1088/1674-4926/44/3/030202

J. Semicond. > 2023, Volume 44 > Issue 3 > 030202

RESEARCH HIGHLIGHTS

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

Zuolin Zhang¹, Mengjia Li¹, Jie Sun³, Cong Chen^{1, 4,}, Jiangzhao Chen^2, and Liming Ding^3,

+ Author Affiliations

1. State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China
2. Key Laboratory of Optoelectronic Technology & Systems (MoE), College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China
3. Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China
4. Macao Institute of Materials Science and Engineering (MIMSE), Macau University of Science and Technology, Macau 999078, China

Author Bio:

Zuolin Zhang received his BE from Hebei University of Technology in June 2021. Currently, he is a Master student in School of Materials Science and Engineering under the supervision of Prof. Cong Chen at Hebei University of Technology. His research focuses on perovskite solar cells.

Mengjia Li received her BE from Hebei University of Technology in June 2020. Currently, she is a PhD student in School of Materials Science and Engineering under the supervision of Prof. Cong Chen at Hebei University of Technology. Her research focuses on perovskite solar cells.

Jie Sun got her BS from Minzu University of China in 2021. Now she is a PhD student at University of Chinese Academy of Sciences under the supervision of Prof. Liming Ding. Her research focuses on perovskite devices.

Cong Chen is currently an associate professor at Hebei University of Technology. He received his PhD from Jilin University in June 2019. His research focuses on solar cells and NIR photodetectors.

Jiangzhao Chen is a professor at College of Optoelectronic Engineering in Chongqing University. He received PhD from Huazhong University of Science and Technology and worked as a postdoc at Sungkyunkwan University and at the University of Hong Kong, respectively. His work focuses on perovskite solar cells.

Liming Ding got his PhD from University of Science and Technology of China (was a joint student at Changchun Institute of Applied Chemistry, CAS). He started his research on OSCs and PLEDs in Olle Inganäs Lab in 1998. Later on, he worked at National Center for Polymer Research, Wright-Patterson Air Force Base and Argonne National Lab (USA). He joined Konarka as a Senior Scientist in 2008. In 2010, he joined National Center for Nanoscience and Technology as a full professor. His research focuses on innovative materials and devices. He is RSC Fellow, and the Associate Editor for Journal of Semiconductors.

Corresponding author: Cong Chen, chencong@hebut.edu.cn; Jiangzhao Chen, jiangzhaochen@cqu.edu.cn; Liming Ding, ding@nanoctr.cn

DOI: 10.1088/1674-4926/44/3/030202

References

[1]	Yu G, Jiang K J, Gu W M, et al. Vacuum-assisted thermal annealing of CsPbI₃ for highly stable and efficient inorganic perovskite solar cells. Angew Chem Int Ed, 2022, 61, e202203778 doi: 10.1002/anie.202203778
[2]	Wang H, Liu H, Dong Z, et al. Composition manipulation boosts the efficiency of carbon-based CsPbI₃ perovskite solar cells to beyond 14%. Nano Energy, 2021, 84, 105881 doi: 10.1016/j.nanoen.2021.105881
[3]	Jia X, Zuo C, Tao S, et al. CsPb(I_xBr_1–x)₃ solar cells. Sci Bull, 2019, 64, 1532 doi: 10.1016/j.scib.2019.08.017
[4]	Wang Y, Zhang X, Shi Z, et al. Stabilizing α-phase FAPbI₃ solar cells. J Semicond, 2022, 43, 040202 doi: 10.1088/1674-4926/43/4/040202
[5]	Yuan Y, Yan G, Hong R, et al. Quantifying efficiency limitations in all-inorganic halide perovskite solar cells. Adv Mater, 2022, 34, e2108132 doi: 10.1002/adma.202108132
[6]	Li Z, Zhou F, Wang Q, et al. Approaches for thermodynamically stabilized CsPbI₃ solar cells. Nano Energy, 2020, 71, 104634 doi: 10.1016/j.nanoen.2020.104634
[7]	Tian T, Yang M, Yang J, et al. Stabilizing black-phase CsPbI₃ under over 70% humidity. J Semicond, 2022, 43, 030501 doi: 10.1088/1674-4926/43/3/030501
[8]	Wang K, Li Z, Zhou F, et al. Ruddlesden-popper 2D component to stabilize γ-CsPbI₃ perovskite phase for stable and efficient photovoltaics. Adv Energy Mater, 2019, 9, 1902529 doi: 10.1002/aenm.201902529
[9]	Tian J, Xue Q, Yao Q, et al. Inorganic Halide perovskite solar cells: progress and challenges. Adv Energy Mater, 2020, 10, 2000183 doi: 10.1002/aenm.202000183
[10]	Wang Q, Zheng X, Deng Y, et al. Stabilizing the α-phase of CsPbI₃ perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule, 2017, 1, 371 doi: 10.1016/j.joule.2017.07.017
[11]	Sanehira E M, Marshall A R, Christians J A, et al. Enhanced mobility CsPbI₃ quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci Adv, 2017, 3, eaao4204 doi: 10.1126/sciadv.aao4204
[12]	Swarnkar A, Marshall A R, Sanehira E M, et al. Quantum dot-induced phase stabilization of α-CsPbI₃ perovskite for high-efficiency photovoltaics. Science, 2016, 354, 92 doi: 10.1126/science.aag2700
[13]	Bai F, Zhang J, Yuan Y, et al. A 0D/3D heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability. Adv Mater, 2019, 31, 1904735 doi: 10.1002/adma.201904735
[14]	Li Z, Sun Y, Yao H, et al. Intermediates transformation for efficient perovskite solar cells. J Energy Chem, 2021, 52, 102 doi: 10.1016/j.jechem.2020.04.047
[15]	Eperon G E, Paternò G M, Sutton R J, et al. Inorganic caesium lead iodide perovskite solar cells. J Mater Chem A, 2015, 3, 19688 doi: 10.1039/C5TA06398A
[16]	Kim Y G, Kim T Y, Oh J H, et al. Cesium lead iodide solar cells controlled by annealing temperature. Phys Chem Chem Phys, 2017, 19, 6257 doi: 10.1039/C6CP08177K
[17]	Zhang T, Dar M I, Li G, et al. Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI₃ perovskite phase for high-efficiency solar cells. Sci Adv, 2017, 3, e1700841 doi: 10.1126/sciadv.1700841
[18]	Yoon S M, Min H, Kim J B, et al. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule, 2021, 5, 183 doi: 10.1016/j.joule.2020.11.020
[19]	Yu B, Shi J, Tan S, et al. Efficient (>20 %) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts. Angew Chem Int Ed, 2021, 60, 13436 doi: 10.1002/anie.202102466
[20]	Lu C, Li X, Guo X, et al. Efficient inverted CsPbI₃ perovskite solar cells fabricated in common air. Chem Eng J, 2023, 452, 139495 doi: 10.1016/j.cej.2022.139495
[21]	Cui Y, Shi J, Meng F, et al. A versatile molten-salt induction strategy to achieve efficient CsPbI₃ perovskite solar cells with a high open-circuit voltage >1.2 V. Adv Mater, 2022, 34, e2205028 doi: 10.1002/adma.202205028
[22]	Jiang Y, Yuan J, Ni Y, et al. Reduced-dimensional α-CsPbX₃ perovskites for efficient and stable photovoltaics. Joule, 2018, 2, 1356 doi: 10.1016/j.joule.2018.05.004
[23]	Huang Q, Liu Y, Li F, et al. Advances in cesium lead iodide perovskite solar cells: processing science matters. Mater Today, 2021, 47, 156 doi: 10.1016/j.mattod.2021.01.014
[24]	Bian H, Wang H, Li Z, et al. Unveiling the effects of hydrolysis-derived DMAI/DMAPbI_x intermediate compound on the performance of CsPbI₃ solar cells. Adv Sci, 2020, 7, 1902868 doi: 10.1002/advs.201902868
[25]	Ke W, Spanopoulos I, Stoumpos C C, et al. Myths and reality of HPbI₃ in halide perovskite solar cells. Nat Commun, 2018, 9, 4785 doi: 10.1038/s41467-018-07204-y
[26]	Lee M V, Raga S R, Kato Y, et al. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells. J Mater Res, 2016, 32, 45 doi: 10.1557/jmr.2016.272
[27]	Pei Y, Liu Y, Li F, et al. Unveiling property of hydrolysis-derived DMAPbI₃ for perovskite devices: composition engineering, defect mitigation, and stability optimization. iScience, 2019, 15, 165 doi: 10.1016/j.isci.2019.04.024
[28]	Gu X, Xiang W, Tian Q, et al. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew Chem Int Ed, 2021, 60, 23164 doi: 10.1002/anie.202109724
[29]	Sun X, Shao Z, Rao Y, et al. A Low-Temperature Additive-involved leaching method for highly efficient inorganic perovskite solar cells. Adv Energy Mater, 2020, 11, 2002754 doi: 10.1002/aenm.202002754
[30]	Jariwala S, Kumar R E, Eperon G E, et al. Dimethylammonium addition to halide perovskite precursor increases vertical and lateral heterogeneity. ACS Energy Lett, 2022, 7, 204 doi: 10.1021/acsenergylett.1c02302
[31]	Jung M, Ji S G, Kim G, et al. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chem Soc Rev, 2019, 48, 2011 doi: 10.1039/C8CS00656C
[32]	Wang Y, Dar M I, Ono L K, et al. Thermodynamically stabilized β-CsPbI₃-based perovskite solar cells with efficiencies >18%. Science, 2019, 365, 591 doi: 10.1126/science.aav8680
[33]	Wang Y, Liu X, Zhang T, et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant. Angew Chem Int Ed, 2019, 58, 16691 doi: 10.1002/ange.201910800
[34]	Chen Y, Liu X, Zhao Y. Organic matrix assisted low-temperature crystallization of black phase inorganic perovskites. Angew Chem Int Ed, 2022, 134, e202110603 doi: 10.1002/ange.202110603
[35]	Sun X, Shao Z, Li Z, et al. Highly efficient CsPbI₃/Cs_1–xDMA_xPbI₃ bulk heterojunction perovskite solar cell. Joule, 2022, 6, 850 doi: 10.1016/j.joule.2022.02.004
[36]	Liu Y, Li F, Gong J, et al. Low-temperature removal of residual dimethylammonium via surface molecular oligomerization for CsPbI₃ perovskite solar cells. ACS Energy Lett, 2022, 7, 3227 doi: 10.1021/acsenergylett.2c01580
[37]	Meng F, Yu B, Zhang Q, et al. Ge incorporation to stabilize efficient inorganic CsPbI₃ perovskite solar cells. Adv Energy Mater, 2022, 12, 2103690 doi: 10.1002/aenm.202103690
[38]	Ding Y, Guo Q, Geng Y, et al. A low-cost hole transport layer enables CsPbI₂Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %. Nano Today, 2022, 46, 101586 doi: 10.1016/j.nantod.2022.101586

Fig. 1. (Color online) (a) Schematic structures for CsPbI₃ phases. Reproduced with permission^[15], Copyright 2015, Royal Society of Chemistry. (b) Structures for FA (top) and DMA (bottom) cations. Reproduced with permission^[25], Copyright 2018, Nature Publishing Group. (c) Schematic for crystal structure evolution from precursor solution to γ-CsPbI₃ and possible chemical interaction. Reproduced with permission^[21], Copyright 2022, Wiley. (d) Schematic for vacuum-assisted thermal annealing of CsPbI₃ film. (e) The conversion of 1D DMAPbI₃ film to 3D CsPbI₃ through cations exchange between Cs⁺ and DMA⁺. Reproduced with permission^[1], Copyright 2022, Wiley.

DownLoad: Full-Size Img PowerPoint

Fig. 2. (Color online) (a) TGA curves for DMAI, DMAPbI₃ powders and the powder scratched from the precursor film of CsI+PbI₂+DMAI. (b) GIWAXS for β-CsPbI₃ films. Reproduced with permission^[32], Copyright 2019, AAAS. (c) Schematic for black-phase CsPbI₃ formation by using DMAI additive. Reproduced with permission^[33], Copyright 2019, Wiley. (d) Schematic for 2-TBA condensation reaction (top) and 3-TBA without condensation reaction (bottom); schematic for DMA⁺ removal by H₂O from the condensation reaction. Reproduced with permission^[36], Copyright 2022, American Chemical Society.

DownLoad: Full-Size Img PowerPoint

[1]	Yu G, Jiang K J, Gu W M, et al. Vacuum-assisted thermal annealing of CsPbI₃ for highly stable and efficient inorganic perovskite solar cells. Angew Chem Int Ed, 2022, 61, e202203778 doi: 10.1002/anie.202203778
[2]	Wang H, Liu H, Dong Z, et al. Composition manipulation boosts the efficiency of carbon-based CsPbI₃ perovskite solar cells to beyond 14%. Nano Energy, 2021, 84, 105881 doi: 10.1016/j.nanoen.2021.105881
[3]	Jia X, Zuo C, Tao S, et al. CsPb(I_xBr_1–x)₃ solar cells. Sci Bull, 2019, 64, 1532 doi: 10.1016/j.scib.2019.08.017
[4]	Wang Y, Zhang X, Shi Z, et al. Stabilizing α-phase FAPbI₃ solar cells. J Semicond, 2022, 43, 040202 doi: 10.1088/1674-4926/43/4/040202
[5]	Yuan Y, Yan G, Hong R, et al. Quantifying efficiency limitations in all-inorganic halide perovskite solar cells. Adv Mater, 2022, 34, e2108132 doi: 10.1002/adma.202108132
[6]	Li Z, Zhou F, Wang Q, et al. Approaches for thermodynamically stabilized CsPbI₃ solar cells. Nano Energy, 2020, 71, 104634 doi: 10.1016/j.nanoen.2020.104634
[7]	Tian T, Yang M, Yang J, et al. Stabilizing black-phase CsPbI₃ under over 70% humidity. J Semicond, 2022, 43, 030501 doi: 10.1088/1674-4926/43/3/030501
[8]	Wang K, Li Z, Zhou F, et al. Ruddlesden-popper 2D component to stabilize γ-CsPbI₃ perovskite phase for stable and efficient photovoltaics. Adv Energy Mater, 2019, 9, 1902529 doi: 10.1002/aenm.201902529
[9]	Tian J, Xue Q, Yao Q, et al. Inorganic Halide perovskite solar cells: progress and challenges. Adv Energy Mater, 2020, 10, 2000183 doi: 10.1002/aenm.202000183
[10]	Wang Q, Zheng X, Deng Y, et al. Stabilizing the α-phase of CsPbI₃ perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule, 2017, 1, 371 doi: 10.1016/j.joule.2017.07.017
[11]	Sanehira E M, Marshall A R, Christians J A, et al. Enhanced mobility CsPbI₃ quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci Adv, 2017, 3, eaao4204 doi: 10.1126/sciadv.aao4204
[12]	Swarnkar A, Marshall A R, Sanehira E M, et al. Quantum dot-induced phase stabilization of α-CsPbI₃ perovskite for high-efficiency photovoltaics. Science, 2016, 354, 92 doi: 10.1126/science.aag2700
[13]	Bai F, Zhang J, Yuan Y, et al. A 0D/3D heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability. Adv Mater, 2019, 31, 1904735 doi: 10.1002/adma.201904735
[14]	Li Z, Sun Y, Yao H, et al. Intermediates transformation for efficient perovskite solar cells. J Energy Chem, 2021, 52, 102 doi: 10.1016/j.jechem.2020.04.047
[15]	Eperon G E, Paternò G M, Sutton R J, et al. Inorganic caesium lead iodide perovskite solar cells. J Mater Chem A, 2015, 3, 19688 doi: 10.1039/C5TA06398A
[16]	Kim Y G, Kim T Y, Oh J H, et al. Cesium lead iodide solar cells controlled by annealing temperature. Phys Chem Chem Phys, 2017, 19, 6257 doi: 10.1039/C6CP08177K
[17]	Zhang T, Dar M I, Li G, et al. Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI₃ perovskite phase for high-efficiency solar cells. Sci Adv, 2017, 3, e1700841 doi: 10.1126/sciadv.1700841
[18]	Yoon S M, Min H, Kim J B, et al. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule, 2021, 5, 183 doi: 10.1016/j.joule.2020.11.020
[19]	Yu B, Shi J, Tan S, et al. Efficient (>20 %) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts. Angew Chem Int Ed, 2021, 60, 13436 doi: 10.1002/anie.202102466
[20]	Lu C, Li X, Guo X, et al. Efficient inverted CsPbI₃ perovskite solar cells fabricated in common air. Chem Eng J, 2023, 452, 139495 doi: 10.1016/j.cej.2022.139495
[21]	Cui Y, Shi J, Meng F, et al. A versatile molten-salt induction strategy to achieve efficient CsPbI₃ perovskite solar cells with a high open-circuit voltage >1.2 V. Adv Mater, 2022, 34, e2205028 doi: 10.1002/adma.202205028
[22]	Jiang Y, Yuan J, Ni Y, et al. Reduced-dimensional α-CsPbX₃ perovskites for efficient and stable photovoltaics. Joule, 2018, 2, 1356 doi: 10.1016/j.joule.2018.05.004
[23]	Huang Q, Liu Y, Li F, et al. Advances in cesium lead iodide perovskite solar cells: processing science matters. Mater Today, 2021, 47, 156 doi: 10.1016/j.mattod.2021.01.014
[24]	Bian H, Wang H, Li Z, et al. Unveiling the effects of hydrolysis-derived DMAI/DMAPbI_x intermediate compound on the performance of CsPbI₃ solar cells. Adv Sci, 2020, 7, 1902868 doi: 10.1002/advs.201902868
[25]	Ke W, Spanopoulos I, Stoumpos C C, et al. Myths and reality of HPbI₃ in halide perovskite solar cells. Nat Commun, 2018, 9, 4785 doi: 10.1038/s41467-018-07204-y
[26]	Lee M V, Raga S R, Kato Y, et al. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells. J Mater Res, 2016, 32, 45 doi: 10.1557/jmr.2016.272
[27]	Pei Y, Liu Y, Li F, et al. Unveiling property of hydrolysis-derived DMAPbI₃ for perovskite devices: composition engineering, defect mitigation, and stability optimization. iScience, 2019, 15, 165 doi: 10.1016/j.isci.2019.04.024
[28]	Gu X, Xiang W, Tian Q, et al. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew Chem Int Ed, 2021, 60, 23164 doi: 10.1002/anie.202109724
[29]	Sun X, Shao Z, Rao Y, et al. A Low-Temperature Additive-involved leaching method for highly efficient inorganic perovskite solar cells. Adv Energy Mater, 2020, 11, 2002754 doi: 10.1002/aenm.202002754
[30]	Jariwala S, Kumar R E, Eperon G E, et al. Dimethylammonium addition to halide perovskite precursor increases vertical and lateral heterogeneity. ACS Energy Lett, 2022, 7, 204 doi: 10.1021/acsenergylett.1c02302
[31]	Jung M, Ji S G, Kim G, et al. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chem Soc Rev, 2019, 48, 2011 doi: 10.1039/C8CS00656C
[32]	Wang Y, Dar M I, Ono L K, et al. Thermodynamically stabilized β-CsPbI₃-based perovskite solar cells with efficiencies >18%. Science, 2019, 365, 591 doi: 10.1126/science.aav8680
[33]	Wang Y, Liu X, Zhang T, et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant. Angew Chem Int Ed, 2019, 58, 16691 doi: 10.1002/ange.201910800
[34]	Chen Y, Liu X, Zhao Y. Organic matrix assisted low-temperature crystallization of black phase inorganic perovskites. Angew Chem Int Ed, 2022, 134, e202110603 doi: 10.1002/ange.202110603
[35]	Sun X, Shao Z, Li Z, et al. Highly efficient CsPbI₃/Cs_1–xDMA_xPbI₃ bulk heterojunction perovskite solar cell. Joule, 2022, 6, 850 doi: 10.1016/j.joule.2022.02.004
[36]	Liu Y, Li F, Gong J, et al. Low-temperature removal of residual dimethylammonium via surface molecular oligomerization for CsPbI₃ perovskite solar cells. ACS Energy Lett, 2022, 7, 3227 doi: 10.1021/acsenergylett.2c01580
[37]	Meng F, Yu B, Zhang Q, et al. Ge incorporation to stabilize efficient inorganic CsPbI₃ perovskite solar cells. Adv Energy Mater, 2022, 12, 2103690 doi: 10.1002/aenm.202103690
[38]	Ding Y, Guo Q, Geng Y, et al. A low-cost hole transport layer enables CsPbI₂Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %. Nano Today, 2022, 46, 101586 doi: 10.1016/j.nantod.2022.101586

Search

GET CITATION

shu

Export: BibTex EndNote

Article Metrics

Article views: 1016 Times PDF downloads: 100 Times Cited by: 0 Times

History

Received: 23 December 2022 Revised: Online: Accepted Manuscript: 23 December 2022Uncorrected proof: 23 December 2022Published: 10 March 2023

Article Navigation > Journal of Semiconductors > 2023 > 44(3): 030202

Zuolin Zhang, Mengjia Li, Jie Sun, Cong Chen, Jiangzhao Chen, Liming Ding. Dimethylammonium cation stabilizes all-inorganic perovskite solar cells[J]. Journal of Semiconductors, 2023, 44(3): 030202. doi: 10.1088/1674-4926/44/3/030202 ****Zuolin Zhang, Mengjia Li, Jie Sun, Cong Chen, Jiangzhao Chen, Liming Ding, Dimethylammonium cation stabilizes all-inorganic perovskite solar cells[J]. Journal of Semiconductors, 2023, 44(3), 030202 doi: 10.1088/1674-4926/44/3/030202

Citation:

Zuolin Zhang, Mengjia Li, Jie Sun, Cong Chen, Jiangzhao Chen, Liming Ding. Dimethylammonium cation stabilizes all-inorganic perovskite solar cells[J]. Journal of Semiconductors, 2023, 44(3): 030202. doi: 10.1088/1674-4926/44/3/030202 ****

Zuolin Zhang, Mengjia Li, Jie Sun, Cong Chen, Jiangzhao Chen, Liming Ding, Dimethylammonium cation stabilizes all-inorganic perovskite solar cells[J]. Journal of Semiconductors, 2023, 44(3), 030202 doi: 10.1088/1674-4926/44/3/030202

Citation:

PDF( 14071 KB)

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

DOI: 10.1088/1674-4926/44/3/030202

1.
State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China
2.
Key Laboratory of Optoelectronic Technology & Systems (MoE), College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China
3.
Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China
4.
Macao Institute of Materials Science and Engineering (MIMSE), Macau University of Science and Technology, Macau 999078, China

More Information

Zuolin Zhang：received his BE from Hebei University of Technology in June 2021. Currently, he is a Master student in School of Materials Science and Engineering under the supervision of Prof. Cong Chen at Hebei University of Technology. His research focuses on perovskite solar cells
Mengjia Li：received her BE from Hebei University of Technology in June 2020. Currently, she is a PhD student in School of Materials Science and Engineering under the supervision of Prof. Cong Chen at Hebei University of Technology. Her research focuses on perovskite solar cells
Jie Sun：got her BS from Minzu University of China in 2021. Now she is a PhD student at University of Chinese Academy of Sciences under the supervision of Prof. Liming Ding. Her research focuses on perovskite devices
Cong Chen：is currently an associate professor at Hebei University of Technology. He received his PhD from Jilin University in June 2019. His research focuses on solar cells and NIR photodetectors
Jiangzhao Chen：is a professor at College of Optoelectronic Engineering in Chongqing University. He received PhD from Huazhong University of Science and Technology and worked as a postdoc at Sungkyunkwan University and at the University of Hong Kong, respectively. His work focuses on perovskite solar cells
Liming Ding：got his PhD from University of Science and Technology of China (was a joint student at Changchun Institute of Applied Chemistry, CAS). He started his research on OSCs and PLEDs in Olle Inganäs Lab in 1998. Later on, he worked at National Center for Polymer Research, Wright-Patterson Air Force Base and Argonne National Lab (USA). He joined Konarka as a Senior Scientist in 2008. In 2010, he joined National Center for Nanoscience and Technology as a full professor. His research focuses on innovative materials and devices. He is RSC Fellow, and the Associate Editor for Journal of Semiconductors
Corresponding author: chencong@hebut.edu.cn; jiangzhaochen@cqu.edu.cn; ding@nanoctr.cn
Received Date: 2022-12-23
Available Online: 2022-12-23

Abstract

FullText(HTML)

References(38)

References

[1]	Yu G, Jiang K J, Gu W M, et al. Vacuum-assisted thermal annealing of CsPbI₃ for highly stable and efficient inorganic perovskite solar cells. Angew Chem Int Ed, 2022, 61, e202203778 doi: 10.1002/anie.202203778
[2]	Wang H, Liu H, Dong Z, et al. Composition manipulation boosts the efficiency of carbon-based CsPbI₃ perovskite solar cells to beyond 14%. Nano Energy, 2021, 84, 105881 doi: 10.1016/j.nanoen.2021.105881
[3]	Jia X, Zuo C, Tao S, et al. CsPb(I_xBr_1–x)₃ solar cells. Sci Bull, 2019, 64, 1532 doi: 10.1016/j.scib.2019.08.017
[4]	Wang Y, Zhang X, Shi Z, et al. Stabilizing α-phase FAPbI₃ solar cells. J Semicond, 2022, 43, 040202 doi: 10.1088/1674-4926/43/4/040202
[5]	Yuan Y, Yan G, Hong R, et al. Quantifying efficiency limitations in all-inorganic halide perovskite solar cells. Adv Mater, 2022, 34, e2108132 doi: 10.1002/adma.202108132
[6]	Li Z, Zhou F, Wang Q, et al. Approaches for thermodynamically stabilized CsPbI₃ solar cells. Nano Energy, 2020, 71, 104634 doi: 10.1016/j.nanoen.2020.104634
[7]	Tian T, Yang M, Yang J, et al. Stabilizing black-phase CsPbI₃ under over 70% humidity. J Semicond, 2022, 43, 030501 doi: 10.1088/1674-4926/43/3/030501
[8]	Wang K, Li Z, Zhou F, et al. Ruddlesden-popper 2D component to stabilize γ-CsPbI₃ perovskite phase for stable and efficient photovoltaics. Adv Energy Mater, 2019, 9, 1902529 doi: 10.1002/aenm.201902529
[9]	Tian J, Xue Q, Yao Q, et al. Inorganic Halide perovskite solar cells: progress and challenges. Adv Energy Mater, 2020, 10, 2000183 doi: 10.1002/aenm.202000183
[10]	Wang Q, Zheng X, Deng Y, et al. Stabilizing the α-phase of CsPbI₃ perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule, 2017, 1, 371 doi: 10.1016/j.joule.2017.07.017
[11]	Sanehira E M, Marshall A R, Christians J A, et al. Enhanced mobility CsPbI₃ quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci Adv, 2017, 3, eaao4204 doi: 10.1126/sciadv.aao4204
[12]	Swarnkar A, Marshall A R, Sanehira E M, et al. Quantum dot-induced phase stabilization of α-CsPbI₃ perovskite for high-efficiency photovoltaics. Science, 2016, 354, 92 doi: 10.1126/science.aag2700
[13]	Bai F, Zhang J, Yuan Y, et al. A 0D/3D heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability. Adv Mater, 2019, 31, 1904735 doi: 10.1002/adma.201904735
[14]	Li Z, Sun Y, Yao H, et al. Intermediates transformation for efficient perovskite solar cells. J Energy Chem, 2021, 52, 102 doi: 10.1016/j.jechem.2020.04.047
[15]	Eperon G E, Paternò G M, Sutton R J, et al. Inorganic caesium lead iodide perovskite solar cells. J Mater Chem A, 2015, 3, 19688 doi: 10.1039/C5TA06398A
[16]	Kim Y G, Kim T Y, Oh J H, et al. Cesium lead iodide solar cells controlled by annealing temperature. Phys Chem Chem Phys, 2017, 19, 6257 doi: 10.1039/C6CP08177K
[17]	Zhang T, Dar M I, Li G, et al. Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI₃ perovskite phase for high-efficiency solar cells. Sci Adv, 2017, 3, e1700841 doi: 10.1126/sciadv.1700841
[18]	Yoon S M, Min H, Kim J B, et al. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule, 2021, 5, 183 doi: 10.1016/j.joule.2020.11.020
[19]	Yu B, Shi J, Tan S, et al. Efficient (>20 %) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts. Angew Chem Int Ed, 2021, 60, 13436 doi: 10.1002/anie.202102466
[20]	Lu C, Li X, Guo X, et al. Efficient inverted CsPbI₃ perovskite solar cells fabricated in common air. Chem Eng J, 2023, 452, 139495 doi: 10.1016/j.cej.2022.139495
[21]	Cui Y, Shi J, Meng F, et al. A versatile molten-salt induction strategy to achieve efficient CsPbI₃ perovskite solar cells with a high open-circuit voltage >1.2 V. Adv Mater, 2022, 34, e2205028 doi: 10.1002/adma.202205028
[22]	Jiang Y, Yuan J, Ni Y, et al. Reduced-dimensional α-CsPbX₃ perovskites for efficient and stable photovoltaics. Joule, 2018, 2, 1356 doi: 10.1016/j.joule.2018.05.004
[23]	Huang Q, Liu Y, Li F, et al. Advances in cesium lead iodide perovskite solar cells: processing science matters. Mater Today, 2021, 47, 156 doi: 10.1016/j.mattod.2021.01.014
[24]	Bian H, Wang H, Li Z, et al. Unveiling the effects of hydrolysis-derived DMAI/DMAPbI_x intermediate compound on the performance of CsPbI₃ solar cells. Adv Sci, 2020, 7, 1902868 doi: 10.1002/advs.201902868
[25]	Ke W, Spanopoulos I, Stoumpos C C, et al. Myths and reality of HPbI₃ in halide perovskite solar cells. Nat Commun, 2018, 9, 4785 doi: 10.1038/s41467-018-07204-y
[26]	Lee M V, Raga S R, Kato Y, et al. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells. J Mater Res, 2016, 32, 45 doi: 10.1557/jmr.2016.272
[27]	Pei Y, Liu Y, Li F, et al. Unveiling property of hydrolysis-derived DMAPbI₃ for perovskite devices: composition engineering, defect mitigation, and stability optimization. iScience, 2019, 15, 165 doi: 10.1016/j.isci.2019.04.024
[28]	Gu X, Xiang W, Tian Q, et al. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew Chem Int Ed, 2021, 60, 23164 doi: 10.1002/anie.202109724
[29]	Sun X, Shao Z, Rao Y, et al. A Low-Temperature Additive-involved leaching method for highly efficient inorganic perovskite solar cells. Adv Energy Mater, 2020, 11, 2002754 doi: 10.1002/aenm.202002754
[30]	Jariwala S, Kumar R E, Eperon G E, et al. Dimethylammonium addition to halide perovskite precursor increases vertical and lateral heterogeneity. ACS Energy Lett, 2022, 7, 204 doi: 10.1021/acsenergylett.1c02302
[31]	Jung M, Ji S G, Kim G, et al. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chem Soc Rev, 2019, 48, 2011 doi: 10.1039/C8CS00656C
[32]	Wang Y, Dar M I, Ono L K, et al. Thermodynamically stabilized β-CsPbI₃-based perovskite solar cells with efficiencies >18%. Science, 2019, 365, 591 doi: 10.1126/science.aav8680
[33]	Wang Y, Liu X, Zhang T, et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant. Angew Chem Int Ed, 2019, 58, 16691 doi: 10.1002/ange.201910800
[34]	Chen Y, Liu X, Zhao Y. Organic matrix assisted low-temperature crystallization of black phase inorganic perovskites. Angew Chem Int Ed, 2022, 134, e202110603 doi: 10.1002/ange.202110603
[35]	Sun X, Shao Z, Li Z, et al. Highly efficient CsPbI₃/Cs_1–xDMA_xPbI₃ bulk heterojunction perovskite solar cell. Joule, 2022, 6, 850 doi: 10.1016/j.joule.2022.02.004
[36]	Liu Y, Li F, Gong J, et al. Low-temperature removal of residual dimethylammonium via surface molecular oligomerization for CsPbI₃ perovskite solar cells. ACS Energy Lett, 2022, 7, 3227 doi: 10.1021/acsenergylett.2c01580
[37]	Meng F, Yu B, Zhang Q, et al. Ge incorporation to stabilize efficient inorganic CsPbI₃ perovskite solar cells. Adv Energy Mater, 2022, 12, 2103690 doi: 10.1002/aenm.202103690
[38]	Ding Y, Guo Q, Geng Y, et al. A low-cost hole transport layer enables CsPbI₂Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %. Nano Today, 2022, 46, 101586 doi: 10.1016/j.nantod.2022.101586

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

References

Search

GET CITATION

Share:

Article Metrics

History

Catalog

Email This Article

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

DOI: 10.1088/1674-4926/44/3/030202

References

Proportional views

Catalog

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

References

Search

GET CITATION

Share:

Article Metrics

History

Catalog

Email This Article

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

DOI: 10.1088/1674-4926/44/3/030202

References

Proportional views

Catalog

Export File

Citation

Format

Content