| Citation: |
Li Jinghu, Wang Yongsheng, Yu Mingyan, Ye Yizheng. A Piecewise Curvature-Corrected CMOS Bandgap Reference with Negative Feedback[J]. Journal of Semiconductors, 2008, 29(10): 1974-1979.
****
Li J H, Wang Y S, Yu M Y, Ye Y Z. A Piecewise Curvature-Corrected CMOS Bandgap Reference with Negative Feedback[J]. J. Semicond., 2008, 29(10): 1974.
|
A Piecewise Curvature-Corrected CMOS Bandgap Reference with Negative Feedback
-
Abstract
A piecewise curvature-corrected bandgap reference (BGR) with negative feedback is proposed.It features employing a temperature-dependent resistor ratio technique to get a piecewise corrected current,which corrects the nonlinear temperature dependence of the first-order BGR.The piecewise corrected current generator also forms negative feedback to improve the line regulation and power supply rejection (PSR).Measurement results show the proposed BGR achieves a maximum temperature coefficient (TC) of 21.2ppm/℃ without trimming in the temperature range of -50~125℃ and a PSR of -60dB at 2.6V supply voltage.The line regulation is 0.8mV/V in the supply range of 2.6~5.6V.It is successfully implemented in an SMIC 0.35μm 5V n-well digital CMOS process with the effective chip area of 0.04mm2 and power consumption of 0.18mW. The reference is applied in a 3,5V optical receiver trans-impedance amplifier. -
References
-
Proportional views
DownLoad: