J. Semicond. > 2021, Volume 42 > Issue 2 > 020201, doi: 10.1088/1674-4926/42/2/020201
|

RESEARCH HIGHLIGHTS

Multidimensional perovskites enhance solar cell performance

Wenzhe Li1, Jiandong Fan1, and Liming Ding2,

+ Author Affiliations

 Corresponding author: Jiandong Fan, jdfan@jnu.edu.cn; Liming Ding, ding@nanoctr.cn

PDF

Turn off MathJax



[1]
Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 2009, 131, 6050 doi: 10.1021/ja809598r
[2]
Best research-cell efficiency chart. NREL Photovoltaic Research, 2020
[3]
Wang R, Mujahid M, Duan Y, et al. A review of perovskites solar cell stability. Adv Funct Mater, 2019, 29, 1808843 doi: 10.1002/adfm.201808843
[4]
Jeon N J, Noh J H, Yang W S, et al. Compositional engineering of perovskite materials for high-performance solar cells. Nature, 2015, 517, 476 doi: 10.1038/nature14133
[5]
Fan J, Ma Y, Zhang C, et al. Thermodynamically self-healing 1D–3D hybrid perovskite solar cells. Adv Energy Mater, 2018, 8, 1703421 doi: 10.1002/aenm.201703421
[6]
Wang S, Chen H, Zhang J, et al. Targeted therapy for interfacial engineering toward stable and efficient perovskite solar cells. Adv Mater, 2019, 31, 1903691 doi: 10.1002/adma.201903691
[7]
Li W, Zhang W, Van Reenen S, et al. Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification. Energy Environ Sci, 2016, 9, 490 doi: 10.1039/C5EE03522H
[8]
Jeon N J, Noh J H, Kim Y C, et al. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nat Mater, 2014, 13, 897 doi: 10.1038/nmat4014
[9]
Li W, Fan J, Li J, et al. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 17%. J Am Chem Soc, 2015, 137, 10399 doi: 10.1021/jacs.5b06444
[10]
Qian J, Guo Q, Liu L, et al. A theoretical study of hybrid lead iodide perovskite homologous semiconductors with 0D, 1D, 2D and 3D structures. J Mater Chem A, 2017, 5, 16786 doi: 10.1039/C7TA04008C
[11]
Zhang X, Wu G, Fu W, et al. Orientation regulation of phenylethylammonium cation based 2D perovskite solar cell with efficiency higher than 11%. Adv Energy Mater, 2018, 8, 1702498 doi: 10.1002/aenm.201702498
[12]
Spanopoulos I, Hadar I, Ke W, et al. Uniaxial expansion of the 2D Ruddlesden–Popper perovskite family for improved environmental stability. J Am Chem Soc, 2019, 141, 5518 doi: 10.1021/jacs.9b01327
[13]
Krishna A, Gottis S, Nazeeruddin M K, et al. Mixed dimensional 2D/3D hybrid perovskite absorbers: The future of perovskite solar cells. Adv Funct Mater, 2019, 29, 1806482 doi: 10.1002/adfm.201806482
[14]
Yu S, Liu H, Wang S, et al. Hydrazinium cation mixed FAPbI3-based perovskite with 1D/3D hybrid dimension structure for efficient and stable solar cells. Chem Eng J, 2021, 403, 125724 doi: 10.1016/j.cej.2020.125724
[15]
Ke W, Spanopoulos I, Stoumpos C C, et al. Myths and reality of HPbI3 in halide perovskite solar cells. Nat Commun, 2018, 9, 4785 doi: 10.1038/s41467-018-07204-y
[16]
Gao L, Spanopoulos I, Ke W, et al. Improved environmental stability and solar cell efficiency of (MA, FA)PbI3 perovskite using a wide-band-gap 1D thiazolium lead iodide capping layer strategy. ACS Energy Lett, 2019, 4, 1763 doi: 10.1021/acsenergylett.9b00930
[17]
Liu P, Xian Y, Yuan W, et al. Lattice-matching structurally-stable 1D@3D perovskites toward highly efficient and stable solar cells. Adv Energy Mater, 2020, 10, 1903654 doi: 10.1002/aenm.201903654
[18]
Mao L, Guo P, Kepenekian M, et al. Structural diversity in white-light-emitting hybrid lead bromide perovskites. J Am Chem Soc, 2018, 140, 13078 doi: 10.1021/jacs.8b08691
[19]
Li W, Zhang C, Ma Y, et al. In situ induced core/shell stabilized hybrid perovskites via gallium (iii) acetylacetonate intermediate towards highly efficient and stable solar cells. Energy Environ Sci, 2018, 11, 286 doi: 10.1039/C7EE03113K
[20]
Zhang Y, Zang M, Yin H, et al. Dimensionally and structurally controllable perovskite single crystals: nickel(ii)–terpyridine complex (Ni–Tpy2)-based perovskites. CrystEngComm, 2020, 22, 1904 doi: 10.1039/C9CE02004G
[21]
Wang Z, Lin Q, Chmiel F P, et al. Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites. Nat Energy, 2017, 2, 17135 doi: 10.1038/nenergy.2017.135
[22]
Gangadharan D T, Ma D. Searching for stability at lower dimensions: current trends and future prospects of layered perovskite solar cells. Energy Environ Sci, 2019, 12, 2860 doi: 10.1039/C9EE01591D
[23]
Grancini G, Nazeeruddin M K. Dimensional tailoring of hybrid perovskites for photovoltaics. Nat Rev Mater, 2019, 4, 4 doi: 10.1038/s41578-018-0065-0
Fig. 1.  (Color online) (a) The structure of hybrid lead iodide perovskite homologous semiconductors with 0D, 1D, 2D and 3D. (b–d) Chemical structure of the A-site cations reported in LD/3D perovskite solar cells[5, 13-20].

DownLoad: Full-Size Img PowerPoint
Fig. 2.  (Color online) (a–c) HRTEM images of core-shell structure. Inset of the Fourier transforms of corresponding lattice fringe[19], reproduced by permission of The Royal Society of Chemistry. (d) Schematic view of the heterojunction microstructure of 1D@3D halide perovskite. Reproduced with permission[17], Copyright 2020, The Wiley Publishing Group.

DownLoad: Full-Size Img PowerPoint
[1]
Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 2009, 131, 6050 doi: 10.1021/ja809598r
[2]
Best research-cell efficiency chart. NREL Photovoltaic Research, 2020
[3]
Wang R, Mujahid M, Duan Y, et al. A review of perovskites solar cell stability. Adv Funct Mater, 2019, 29, 1808843 doi: 10.1002/adfm.201808843
[4]
Jeon N J, Noh J H, Yang W S, et al. Compositional engineering of perovskite materials for high-performance solar cells. Nature, 2015, 517, 476 doi: 10.1038/nature14133
[5]
Fan J, Ma Y, Zhang C, et al. Thermodynamically self-healing 1D–3D hybrid perovskite solar cells. Adv Energy Mater, 2018, 8, 1703421 doi: 10.1002/aenm.201703421
[6]
Wang S, Chen H, Zhang J, et al. Targeted therapy for interfacial engineering toward stable and efficient perovskite solar cells. Adv Mater, 2019, 31, 1903691 doi: 10.1002/adma.201903691
[7]
Li W, Zhang W, Van Reenen S, et al. Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification. Energy Environ Sci, 2016, 9, 490 doi: 10.1039/C5EE03522H
[8]
Jeon N J, Noh J H, Kim Y C, et al. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nat Mater, 2014, 13, 897 doi: 10.1038/nmat4014
[9]
Li W, Fan J, Li J, et al. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 17%. J Am Chem Soc, 2015, 137, 10399 doi: 10.1021/jacs.5b06444
[10]
Qian J, Guo Q, Liu L, et al. A theoretical study of hybrid lead iodide perovskite homologous semiconductors with 0D, 1D, 2D and 3D structures. J Mater Chem A, 2017, 5, 16786 doi: 10.1039/C7TA04008C
[11]
Zhang X, Wu G, Fu W, et al. Orientation regulation of phenylethylammonium cation based 2D perovskite solar cell with efficiency higher than 11%. Adv Energy Mater, 2018, 8, 1702498 doi: 10.1002/aenm.201702498
[12]
Spanopoulos I, Hadar I, Ke W, et al. Uniaxial expansion of the 2D Ruddlesden–Popper perovskite family for improved environmental stability. J Am Chem Soc, 2019, 141, 5518 doi: 10.1021/jacs.9b01327
[13]
Krishna A, Gottis S, Nazeeruddin M K, et al. Mixed dimensional 2D/3D hybrid perovskite absorbers: The future of perovskite solar cells. Adv Funct Mater, 2019, 29, 1806482 doi: 10.1002/adfm.201806482
[14]
Yu S, Liu H, Wang S, et al. Hydrazinium cation mixed FAPbI3-based perovskite with 1D/3D hybrid dimension structure for efficient and stable solar cells. Chem Eng J, 2021, 403, 125724 doi: 10.1016/j.cej.2020.125724
[15]
Ke W, Spanopoulos I, Stoumpos C C, et al. Myths and reality of HPbI3 in halide perovskite solar cells. Nat Commun, 2018, 9, 4785 doi: 10.1038/s41467-018-07204-y
[16]
Gao L, Spanopoulos I, Ke W, et al. Improved environmental stability and solar cell efficiency of (MA, FA)PbI3 perovskite using a wide-band-gap 1D thiazolium lead iodide capping layer strategy. ACS Energy Lett, 2019, 4, 1763 doi: 10.1021/acsenergylett.9b00930
[17]
Liu P, Xian Y, Yuan W, et al. Lattice-matching structurally-stable 1D@3D perovskites toward highly efficient and stable solar cells. Adv Energy Mater, 2020, 10, 1903654 doi: 10.1002/aenm.201903654
[18]
Mao L, Guo P, Kepenekian M, et al. Structural diversity in white-light-emitting hybrid lead bromide perovskites. J Am Chem Soc, 2018, 140, 13078 doi: 10.1021/jacs.8b08691
[19]
Li W, Zhang C, Ma Y, et al. In situ induced core/shell stabilized hybrid perovskites via gallium (iii) acetylacetonate intermediate towards highly efficient and stable solar cells. Energy Environ Sci, 2018, 11, 286 doi: 10.1039/C7EE03113K
[20]
Zhang Y, Zang M, Yin H, et al. Dimensionally and structurally controllable perovskite single crystals: nickel(ii)–terpyridine complex (Ni–Tpy2)-based perovskites. CrystEngComm, 2020, 22, 1904 doi: 10.1039/C9CE02004G
[21]
Wang Z, Lin Q, Chmiel F P, et al. Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites. Nat Energy, 2017, 2, 17135 doi: 10.1038/nenergy.2017.135
[22]
Gangadharan D T, Ma D. Searching for stability at lower dimensions: current trends and future prospects of layered perovskite solar cells. Energy Environ Sci, 2019, 12, 2860 doi: 10.1039/C9EE01591D
[23]
Grancini G, Nazeeruddin M K. Dimensional tailoring of hybrid perovskites for photovoltaics. Nat Rev Mater, 2019, 4, 4 doi: 10.1038/s41578-018-0065-0

    • Search

    Advanced Search >>

    GET CITATION

    shu

    Export: BibTex EndNote

    Article Metrics

    Article views: 3146 Times PDF downloads: 132 Times Cited by: 0 Times

    History

    Received: 02 January 2021 Revised: Online: Accepted Manuscript: 04 January 2021Uncorrected proof: 04 January 2021Published: 08 February 2021

    Catalog

      Email This Article

      User name:
      Email:*请输入正确邮箱
      Code:*验证码错误
      Send
      Article Navigation >  Journal of Semiconductors  > 2021  >  42(2): 020201
      Wenzhe Li, Jiandong Fan, Liming Ding. Multidimensional perovskites enhance solar cell performance[J]. Journal of Semiconductors, 2021, 42(2): 020201. doi: 10.1088/1674-4926/42/2/020201 ****W Z Li, J D Fan, L M Ding, Multidimensional perovskites enhance solar cell performance[J]. J. Semicond., 2021, 42(2): 020201. doi: 10.1088/1674-4926/42/2/020201.
      Citation:
      Wenzhe Li, Jiandong Fan, Liming Ding. Multidimensional perovskites enhance solar cell performance[J]. Journal of Semiconductors, 2021, 42(2): 020201. doi: 10.1088/1674-4926/42/2/020201 ****
      W Z Li, J D Fan, L M Ding, Multidimensional perovskites enhance solar cell performance[J]. J. Semicond., 2021, 42(2): 020201. doi: 10.1088/1674-4926/42/2/020201.
      shu

      Multidimensional perovskites enhance solar cell performance

      doi: 10.1088/1674-4926/42/2/020201
      • 1.

        Institute of New Energy Technology, Department of Electronic Science and Engineering, College of Information Science and Technology, Jinan University, Guangzhou 510632, China

      • 2.

        Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

      More Information
      • Wenzhe Li：received his Ph.D. in the Department of Chemistry, Tsinghua University, in 2017. He joined Henry Snaith Group in Oxford University for joint cultivation in 2014–2015. Currently, he is an associate professor in Institute of New Energy Technology (iNET), College of Information Sciences and Technology at Jinan University. His current research focuses on structural design of novel perovskites, optoelectronic devices, carrier transport dynamics, and device stabilities
      • Jiandong Fan：obtained his Ph.D. from the University of Barcelona in 2013. Afterward, he worked in Swinburne University of Technology and Oxford University as a postdoc. Currently, he is a full professor in Institute of New Energy Technology (iNET), College of Information Sciences and Technology at Jinan University. His research interests include crystallographic characterizations, and thin-film photoelectric and photovoltaic devices
      • Liming Ding：got his PhD from University of Science and Technology of China (was a joint student at Changchun Institute of Applied Chemistry, CAS). He started his research on OSCs and PLEDs in Olle Inganäs Lab in 1998. Later on, he worked at National Center for Polymer Research, Wright-Patterson Air Force Base and Argonne National Lab (USA). He joined Konarka as a Senior Scientist in 2008. In 2010, he joined National Center for Nanoscience and Technology as a full professor. His research focuses on functional materials and devices. He is RSC Fellow, the nominator for Xplorer Prize, and the Associate Editors for Science Bulletin and Journal of Semiconductors
      • Corresponding author: jdfan@jnu.edu.cn; ding@nanoctr.cn
      • Received Date: 2021-01-02
      • Published Date: 2021-02-10

      Catalog

        Journal of Semiconductors © 2017 All Rights Reserved   京ICP备05085259号-2

        /

        DownLoad:  Full-Size Img  PowerPoint
        Return
        Return