Citation: |
Chen Chi, Hao Yue, Feng Hui, Gu Wenping, Li Zhiming, Hu Shigang, Ma Teng. An X-band four-way combined GaN solid-state power amplifier[J]. Journal of Semiconductors, 2010, 31(1): 015003. doi: 10.1088/1674-4926/31/1/015003
****
Chen C, Hao Y, Feng H, Gu W P, Li Z M, Hu S G, Ma T. An X-band four-way combined GaN solid-state power amplifier[J]. J. Semicond., 2010, 31(1): 015003. doi: 10.1088/1674-4926/31/1/015003.
|
-
Abstract
An X-band four-way combined GaN solid-state power amplifier module is fabricated based on a self-developed AlGaN/GaN HEMT with 2.5-mm gate width technology on SiC substrate. The module consists of an AlGaN/GaN HEMT,Wilkinson power hybrids, a DC-bias circuit and microstrip matching circuits. For the stability of the amplifier module, special RC networks at the input and output, a resistor between the DC power supply and a transistor gate at the input and 3/4 Wilkinson power hybrids are used for the cancellation of low frequency self-oscillation and crosstalk of each amplifier. Under Vds = 27 V,Vgs = -4.0V, CW operating conditions at 8 GHz, the amplifier module exhibits a line gain of 5 dB with a power added efficiency of 17.9%, and an output power of 42.93 dBm; the power gain compression is 2 dB. For a four-way combined solid-state amplifier, the power combining efficiency is 67.5%. It is concluded that the reduction in combining efficiency results from the non-identical GaN HMET, the loss of the hybrid coupler and the circuit fabricating errors of each one-way amplifier. -
References
-
Proportional views